RTU5025 SMS příkazy

22 příkazů. Klepni na tlačítko kopírování, zkopíruj ukázkový příkaz a vlož ho do SMS aplikace.

Poznámka: Commands use NO # delimiters (unlike Callny). Password is 4 digits. Up to 200 authorized numbers (positions 001-200). Commands must be CAPS LOCK. Device will NOT reply if command is invalid (for security).
Příkazy nefungují? Some RTU5024 clones use a different firmware with #-delimited commands (e.g. 1234#ON# instead of 1234CC). If your device doesn't respond to these commands, your unit likely runs Callny-compatible firmware. Try Callny G202 commands instead →

Výchozí heslo: 1234

Initialize (REQUIRED first step)

admin

Register the module's SIM card number. This is the FIRST command you must send. Use 00 prefix instead of +.

Syntaxe

{pwd}TEL{moduleSIM}#

Příklad

1234TEL00861351015#

Odpověď

Set Success!

Sync clock

admin

Set the module's internal clock. Required for time-limited users to work correctly.

Syntaxe

{pwd}T{YYMMDDHHmm}#

Příklad

1234T2603291530#

Odpověď

Set Time OK!

Change password

admin

Change device password to new 4-digit password.

Syntaxe

{pwd}P{newpwd}

Příklad

1234P6666

Odpověď

Password changed to {newpwd}, please remember it carefully.

Add permanent user

admin

Add authorized user to slot (001-200). Always allowed to call and control.

Syntaxe

{pwd}A{slot}#{phone}#

Příklad

1234A003#123456#

Odpověď

User added confirmation

Add time-limited user

admin

Add user with access limited to a date/time range. Clock must be synced first.

Syntaxe

{pwd}A{slot}#{phone}#{startYYMMDDHHmm}#{endYYMMDDHHmm}#

Příklad

1234A016#123456#1502050800#1502051000#

Odpověď

User added confirmation

Query user by slot

admin

Check which phone number is stored at a position.

Syntaxe

{pwd}A{slot}#

Příklad

1234A002#

Odpověď

Phone number at slot or Empty

Batch query users

admin

Query authorized numbers from slot range. Returns multiple SMS (10 numbers per SMS).

Syntaxe

{pwd}AL{slotStart}#{slotEnd}#

Příklad

1234AL002#050#

Odpověď

List of users across multiple SMS

Delete user

admin

Remove authorized number at position (or overwrite with new number).

Syntaxe

{pwd}A{slot}##

Příklad

1234A002##

Odpověď

User deleted

Allow all callers

admin

Allow any phone number to trigger the relay. WARNING: free access for anyone.

Syntaxe

{pwd}ALL#

Příklad

1234ALL#

Odpověď

Allow all mode set

Authorized users only (default)

admin

Only authorized numbers can trigger the relay. Recommended setting.

Syntaxe

{pwd}AUT#

Příklad

1234AUT#

Odpověď

Authorized only mode set

Set relay close time

admin

How long relay stays closed (ON) after call. 000=0.5s latch, 001-998=seconds, 999=stays on until next call.

Syntaxe

{pwd}GOT{seconds}#

Příklad

1234GOT030#

Odpověď

Relay time set

Configure relay ON SMS

admin

Set who receives SMS when relay turns ON and what it says. a=first user (0/1), b=caller (0/1).

Syntaxe

{pwd}GON{ab}#{content}#

Příklad

1234GON11#DoorOpen#

Odpověď

Confirmation set

Configure relay OFF SMS

admin

Set who receives SMS when relay turns OFF and what it says.

Syntaxe

{pwd}GOFF{ab}#{content}#

Příklad

1234GOFF00#DoorClose#

Odpověď

Confirmation set

Disable relay ON SMS

admin

No SMS notification when relay turns ON.

Syntaxe

{pwd}GON##

Příklad

1234GON##

Odpověď

ON notification disabled

Disable relay OFF SMS

admin

No SMS notification when relay turns OFF.

Syntaxe

{pwd}GOFF##

Příklad

1234GOFF##

Odpověď

OFF notification disabled

Relay ON (by SMS)

all authorized

Turn relay on via SMS command. Close time follows GOT setting.

Syntaxe

{pwd}CC

Příklad

1234CC

Odpověď

Relay ON (or custom GON content)

Relay OFF (by SMS)

all authorized

Turn relay off via SMS command.

Syntaxe

{pwd}DD

Příklad

1234DD

Odpověď

Relay OFF (or custom GOFF content)

Check status

all authorized

Query relay state, signal strength, and device info.

Syntaxe

{pwd}EE

Příklad

1234EE

Odpověď

Relay status, GSM signal value, firmware info

Set auto-report interval

admin

Auto-send status report to first user every X hours. 000=disabled (default).

Syntaxe

{pwd}T#{hours}#

Příklad

1234T#024#

Odpověď

Auto-report set

Query auto-report interval

admin

Check current auto-report interval.

Syntaxe

{pwd}T#

Příklad

1234T#

Odpověď

Current interval in hours

Query IMEI and firmware

admin

Get the module's IMEI code and firmware version.

Syntaxe

{pwd}IMEI#

Příklad

1234IMEI#

Odpověď

IMEI and firmware info

Factory reset

physical button or SMS

Reset to factory settings. Authorized users are preserved. Can also hold reset button on device.

Syntaxe

RESET

Příklad

RESET

Odpověď

Device restarts
Získat GateOpener