RTU5035 Commandes SMS

22 commandes. Appuie sur le bouton copier pour copier la commande d'exemple, puis colle-la dans ton app SMS.

Remarque : Commands use NO # delimiters (unlike Callny). Password is 4 digits. Up to 200 authorized numbers (positions 001-200). Commands must be CAPS LOCK. Device will NOT reply if command is invalid (for security).
Les commandes ne fonctionnent pas ? Some RTU5024 clones use a different firmware with #-delimited commands (e.g. 1234#ON# instead of 1234CC). If your device doesn't respond to these commands, your unit likely runs Callny-compatible firmware. Try Callny G202 commands instead →

Mot de passe par défaut : 1234

Initialize (REQUIRED first step)

admin

Register the module's SIM card number. This is the FIRST command you must send. Use 00 prefix instead of +.

Syntaxe

{pwd}TEL{moduleSIM}#

Exemple

1234TEL00861351015#

Réponse

Set Success!

Sync clock

admin

Set the module's internal clock. Required for time-limited users to work correctly.

Syntaxe

{pwd}T{YYMMDDHHmm}#

Exemple

1234T2603291530#

Réponse

Set Time OK!

Change password

admin

Change device password to new 4-digit password.

Syntaxe

{pwd}P{newpwd}

Exemple

1234P6666

Réponse

Password changed to {newpwd}, please remember it carefully.

Add permanent user

admin

Add authorized user to slot (001-200). Always allowed to call and control.

Syntaxe

{pwd}A{slot}#{phone}#

Exemple

1234A003#123456#

Réponse

User added confirmation

Add time-limited user

admin

Add user with access limited to a date/time range. Clock must be synced first.

Syntaxe

{pwd}A{slot}#{phone}#{startYYMMDDHHmm}#{endYYMMDDHHmm}#

Exemple

1234A016#123456#1502050800#1502051000#

Réponse

User added confirmation

Query user by slot

admin

Check which phone number is stored at a position.

Syntaxe

{pwd}A{slot}#

Exemple

1234A002#

Réponse

Phone number at slot or Empty

Batch query users

admin

Query authorized numbers from slot range. Returns multiple SMS (10 numbers per SMS).

Syntaxe

{pwd}AL{slotStart}#{slotEnd}#

Exemple

1234AL002#050#

Réponse

List of users across multiple SMS

Delete user

admin

Remove authorized number at position (or overwrite with new number).

Syntaxe

{pwd}A{slot}##

Exemple

1234A002##

Réponse

User deleted

Allow all callers

admin

Allow any phone number to trigger the relay. WARNING: free access for anyone.

Syntaxe

{pwd}ALL#

Exemple

1234ALL#

Réponse

Allow all mode set

Authorized users only (default)

admin

Only authorized numbers can trigger the relay. Recommended setting.

Syntaxe

{pwd}AUT#

Exemple

1234AUT#

Réponse

Authorized only mode set

Set relay close time

admin

How long relay stays closed (ON) after call. 000=0.5s latch, 001-998=seconds, 999=stays on until next call.

Syntaxe

{pwd}GOT{seconds}#

Exemple

1234GOT030#

Réponse

Relay time set

Configure relay ON SMS

admin

Set who receives SMS when relay turns ON and what it says. a=first user (0/1), b=caller (0/1).

Syntaxe

{pwd}GON{ab}#{content}#

Exemple

1234GON11#DoorOpen#

Réponse

Confirmation set

Configure relay OFF SMS

admin

Set who receives SMS when relay turns OFF and what it says.

Syntaxe

{pwd}GOFF{ab}#{content}#

Exemple

1234GOFF00#DoorClose#

Réponse

Confirmation set

Disable relay ON SMS

admin

No SMS notification when relay turns ON.

Syntaxe

{pwd}GON##

Exemple

1234GON##

Réponse

ON notification disabled

Disable relay OFF SMS

admin

No SMS notification when relay turns OFF.

Syntaxe

{pwd}GOFF##

Exemple

1234GOFF##

Réponse

OFF notification disabled

Relay ON (by SMS)

all authorized

Turn relay on via SMS command. Close time follows GOT setting.

Syntaxe

{pwd}CC

Exemple

1234CC

Réponse

Relay ON (or custom GON content)

Relay OFF (by SMS)

all authorized

Turn relay off via SMS command.

Syntaxe

{pwd}DD

Exemple

1234DD

Réponse

Relay OFF (or custom GOFF content)

Check status

all authorized

Query relay state, signal strength, and device info.

Syntaxe

{pwd}EE

Exemple

1234EE

Réponse

Relay status, GSM signal value, firmware info

Set auto-report interval

admin

Auto-send status report to first user every X hours. 000=disabled (default).

Syntaxe

{pwd}T#{hours}#

Exemple

1234T#024#

Réponse

Auto-report set

Query auto-report interval

admin

Check current auto-report interval.

Syntaxe

{pwd}T#

Exemple

1234T#

Réponse

Current interval in hours

Query IMEI and firmware

admin

Get the module's IMEI code and firmware version.

Syntaxe

{pwd}IMEI#

Exemple

1234IMEI#

Réponse

IMEI and firmware info

Factory reset

physical button or SMS

Reset to factory settings. Authorized users are preserved. Can also hold reset button on device.

Syntaxe

RESET

Exemple

RESET

Réponse

Device restarts
Télécharger GateOpener